Page text

MSDS 323C,  Page 2 of 2
FIRST AID MEASURES
Eyes:
Flush with plenty of water.  Call a physician if symptoms occur.
Skin:
Wash with soap and water.  Seek medical attention if any effects persist.
Inhalation:
Move victim to fresh air.  Call a physician if symptoms persist.
Ingestion:
Do not induce vomiting unless directed by a physician.  Contact a physician immediately.
Other:
Referral to a physician is recommended if there is any question about the seriousness of the
injury/exposure
PREVENTIVE  MEASURES
Engineering controls:
General (natural or mechanically induced fresh air movements).
Eye protection:
While spraying, chemical goggles recommended.  As a minimum, wear safety glasses with side
shields.
Skin protection:
Impermeable gloves recommended.
Respiratory protection:
Dust/mist respirator may be required during spraying operations.
Other:
No additional measures are normally required.
Handling procedures and
equipment:
For industrial use only.  Keep out of reach of children.  Keep container closed when not in use.  Do
not get into the eyes.  Avoid prolonged or repeated contact with the skin.  Practice good hygiene;
i.e., wash after using and before eating or smoking.
Storage requirements:
Store in a cool dry area.  Keep from freezing.  Store between 5º and 25º C (40º and 77º F).
Spill, leak or release:
Immediately wipe away spilled material before it hardens.  Place in a container for proper disposal
in accordance with all applicable local, state, or federal requirements.
Waste disposal:
Consult with regulatory agencies or your corporate personnel for disposal methods that comply
with local, provincial, and federal safety, health and environmental regulations.
Special shipping instructions:
According to TDG shipping regulations.  See below.
REGULATORY INFORMATION
WHMIS classification:
D2A, D1B
HMIS codes:
Health 1,  Flammability 0,  Reactivity 0,  PPE B
TDG shipping name:
Not regulated.
PREPARATION INFORMATION / CONTACTS
Prepared by:
Hilti, Inc., Tulsa, OK
USA
Date of Preparation:
Oct. 31, 2008
Emergency
phone number:
1 800 424 9300
Customer Service:
Hilti (Canada) Corporation, Mississauga, Ontario;  1 800 363 4458
Health / Safety contacts:
Hilti, Inc., Tulsa, OK USA; 1 800 879 6000        Jerry Metcalf  (x3704)
Abbreviations used:
n/av = Not Available. H = Hours. HMIS:  Hazardous Materials Identification System.  T = Total
dust.  R = Respirable dust. C = Ceiling    N/ap = Not applicable
The information and recommendations contained herein are based upon data believed to be correct; however, no guarantee or
warranty of any kind expressed or implied is made with respect to the information provided.