Page text

Page 3/6
Safety Data Sheet
acc. to ISO 11014
Printing date 10/08/2015
Reviewed on 10/08/2015
Version number 5
(Contd. of page 2)
41.2.11
*
7Handling and storage
· Handling
· Precautions for safe handling Ensure good ventilation/exhaustion at the workplace.
· Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and receptacles: keep containers securely closed and dry, store at 5 - 25 °C / 41 - 77 °F
· Information about storage in one common storage facility: Store away from foodstuffs.
· Further information about storage conditions:
Store under lock and key and with access restricted to technical experts or their assistants only.
Store receptacle in a well ventilated area.
Protect from heat and direct sunlight.
· Specific end use(s) No further relevant information available.
*
8Exposure controls/personal protection
· Additional information about design of technical systems: No further data; see item 7.
· Control parameters
· Components with limit values that require monitoring at the workplace:
9016-87-9 4,4'-diphenylmethanediisocyanate, isomeres and homologues (25-50%)
TLV(as inhalable aerosols)
· Exposure controls
· Personal protective equipment
· General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed.
Do not inhale gases / fumes / aerosols.
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
Avoid contact with the eyes and skin.
· Breathing equipment:
Not necessary if room is well-ventilated.
Use suitable respiratory protective device in case of insufficient ventilation.
Filter AX.
EN 371
· Protection of hands:
Protective gloves.
EN 374
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to
manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has
therefore to be checked prior to the application.
· Penetration time of glove material
Value for the permeation: Level  60 min
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection:
Tightly sealed goggles.
EN 166 + EN 170
· Body protection:
Protective work clothing.
*
9Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Fluid
(Contd. on page 4)
US