Page text

MSDS 283C,  Page 2 of 2
FIRST AID MEASURES
Eyes:
Flush with plenty of water.  Call a physician if symptoms occur.
Skin:
Wash with soap and water.  Seek medical attention if any effects persist.
Inhalation:
No ill effects expected.  Should discomfort occur, move to fresh air.
Ingestion:
Do not induce vomiting unless directed to by a physician.  Contact a Physician immediately.
Other:
Referral to a physician is recommended if there is any question about the seriousness of the
injury/exposure
PREVENTIVE MEASURES
Engineering controls:
General (natural or mechanically induced fresh air movements).
Eye protection:
Safety glasses with side shields recommended.
Skin protection:
Impermeable gloves recommended.
Respiratory protection:
None normally required.
Other:
No additional measures are normally required.
Handling procedures and
equipment:
For industrial use only.  Use with adequate ventilation.  Keep container closed when not in use.
Avoid prolonged or repeated contact with the skin.  Practice good hygiene; i.e., wash after using
and before eating or smoking.
Storage requirements:
Keep out of reach of children.  Store in a cool dry area.  Keep from freezing.  Store between 5º
and 25º C.
Spill, leak or release:
Wear appropriate personal protective equipment.  Allow to cure, scrape up and place in a
salvage container for proper disposal.  See disposal guidelines below.
Waste disposal:
No known restrictions. Consult with regulatory agencies or your corporate personnel for disposal
methods that comply with local, provincial, and federal safety, health and environmental
regulations.
Special shipping instructions:
Avoid temperature extremes.  Keep from freezing.
REGULATORY INFORMATION
WHMIS classification:
D2B
HMIS codes:
Health 1,  Flammability 0,  Reactivity 0,  PPE B (glasses, gloves)
TDG shipping name:
Not regulated.
PREPARATION INFORMATION / CONTACTS
Prepared by:
Hilti, Inc., Tulsa,
OK USA
Date of Preparation:
March 9, 2007
Emergency phone
number:
1 800 424 9300
Customer Service:
Hilti (Canada) Corporation, Mississauga, Ontario;  1 800 363 4458
Health / Safety contacts:
Hilti, Inc., Tulsa, OK USA; 1 800 879 6000,  Jerry Metcalf  (x6704)
Abbreviations used:
N/E = None Established.  N/Ap = Not Applicable.  N/Av = Not Available. HMIS:  Hazardous
Materials Identification System
The information and recommendations contained herein are based upon data believed to be correct; however, no guarantee or
warranty of any kind expressed or implied is made with respect to the information provided.